Masonary grab adhesive

Masonary grab adhesive

  • Unit price per 
Tax included.


Size: 290ml
Coverage: approx. 1.5sqm per tube
Note : maximum operating temperature is 90ºC so it is not advisable to use this in close proximity to a stove.

Raw material basis: MS Polymer
Consistency: Non-slump paste
Specific gravity: approx. 1.55 g/ml
Skin forming time: 15 – 20 minutes (at 23ºC; 50% R.H.)
Curing rate: 2-3 mm/24 hr
Resistance to flow (ISO 7390): approx. 0 mm
Consumption: approx. 50 ml/ linear meter (nozzle diameter: 8mm)
Application temperature: Between 5ºC to 40 ºC
Properties of the cured product: (After one week at 23ºC and 50% R.H.)
Service temperature: -40ºC to +90ºC
Shore A hardness (ISO 868): 65
Max. tensile (ISO 37): 2,50 MPa.
Elongation at break (ISO 37): > 250 %
These values may vary depending on environmental factors such as temperature, moisture, and type of substrates. The time until complete curing may be extended at lower temperature, lower humidity or increasing film thickness.

Please contact us if you are interested in this product.